IP Audio Solutions for Singlewire InformaCast

Digital Acoustics provides IP audio solutions for Singlewire InformaCast using industry leading IP7 IP Speakers and IP Amplifiers. InformaCast enables sending of scheduled and live audio to groups of IP Speakers and IP Amplifiers using Cisco Unified Communications Manager or other VoIP based phone systems.

Digital Acoustics IP7 IP Speakers are simple to install, are PoE ready and provide up to 8 watts of audio. The following models are available with the “InformaCast Enabled” option:

  • SPKR-IPSystem-1-IC – Wall/Ceiling IP Speaker with coverage up to 400 square feet
  • SPKR-IPSystem-12-IC – 2×2 Lay-in Ceiling IP Speaker for quick and easy installation
  • SPKR-IP11-BD-P-IC – BiDirectional Hallway IP Speaker with coverage for areas up to 12′ x 100′

Digital Acoustics can convert your existing 70V analog system to IP. Just install an IP7-STx-IC on your network and connect it to the balanced inputs of your analog amplifier as shown in the following picture. Make sure to specify the “Informacast enabled” option when ordering:
IP7-STx - Analog Amplifier

Digital Acoustics also supplies IP Amplifiers in 8 or 40 watt models which are capable of driving a group of speakers using optional 70V matching line transformers or a single 8 Ohm speaker. IP Amplifiers can be combined with new or existing speakers for greenfield or retrofit installations.
IP7-STx - Analog Amplifier

IP Amplifiers and Analog Horn Speakers:

For additional information on using IP7 devices with Informacast, view the Application Note – IP7 for InformaCast Installation and Configuration Guide found under the Support –> Application Notes page of our website.

For additional information on InformaCast, visit the Singlewire software site.

Contact Sales

Worldwide: +1 224-544-5710
Toll Free (USA) : +1 877-724-3387
e-mail: salesinfo@digitalacoustics.com

Submit A Request

* These fields are required.


Live Chat