Hallway BiDirectional IP Speaker

IP-Enabled Dual 4″ Speaker, Hallway Wall Mount, White IP Speaker, SIP Speaker or VoIP Speaker. 8 Watt, PoE Specifically designed for coverage of  long hallways and can be used for indoor IP Paging and SIP Paging  environments.

Ordering Options:

Firmware Feature SKU
IP7 SPKR-IP11-BD-P
S3 SPKR-IP11-BD-P-S3
S3/InformaCast SPKR-IP11-BD-P-S3-IC

Detailed information about each feature is described in the “Additional information” tab below.

SKU: SPKR-IP11-BD-P Category:

Hallway bi-directional IP Speaker, SIP Speaker or VoIP Speaker for IP Paging and emergency notifications.  The product can be surface mounted to wall or ceiling with the long axis parallel to the floor plane and traffic flow and is designed for interior IP Paging, SIP Paging and emergency notifications.

This IP Speaker is ideally suited to minimize the number of speakers required to cover long hallways due to its unique bi-directional design and can be used in place of several ceiling or wall mounted speakers.  Coverage of up to 100′ is possible.

Click for Product Datasheet

IP7

The IP7 Firmware Feature enables compatibility with Digital Acoustics TalkMaster FOCUS software and/or to SIP based phone systems.

TalkMaster FOCUS enables multiple console operators to communicate with IP Endpoints through two-way intercom calls and to send one-way messages to predefined paging groups.

The IP7 Firmware also enables connection to a SIP based phone system and to receive calls and if so equipped to initiate a call. SIP Peer-to-Peer mode is also supported.

IP Endpoints can connect to TalkMaster or to a SIP phone system or to both systems concurrently.

TalkMaster Administrator Console can be used to configure all of the the IP Endpoint's connections and options.

S3

The S3 Firmware Feature enables an IP Endpoint to connect to a SIP based Phone System.

S3 Firmware enables the IP Endpoint to be configured through a standard web browser and supports the high fidelity G.722 voice codec. in addition to the standard G.711 uLaw and aLaw voice codecs. IP Endpoint can receive and automatically answer calls. They can also initiate a SIP call if so equipped.

SIP Peer-to-Peer mode is also supported.

S3/InformaCast

The S3/InformaCast Firmware feature enables the IP Endpoint to connect to Singlewire's InformaCast software and to SIP based Phone systems. Please note that InformaCast only supports outbound paging even on products that have two-way capabilities.

With S3/InformaCast firmware, IP Endpoints can be grouped together for multicast paging from Cisco Universal Call Manager (CUCM) or other IP based phone systems.

It also enables the IP Endpoint to optionally connect to a SIP based Phone System with browser based configuration as well as the high fidelity G.722 voice codec in addition to the standard G.711 uLaw and aLaw voice codecs.

SIP Peer-to-Peer mode is also supported.

Scroll to Top